Jansite Hardwire Kit for Dash Cam Mirror

The Jansite Hardwire Kit comes with two randomly shipped appearances, but the functionality remains the same across all new versions. To find the correct fuse slot for your installation, first locate the car's fuse box, referring to the vehicle's manual for guidance. Open the fuse box and identify the appropriate fuse slot for your hardwire kit.

If your kit requires an ignition-switched fuse, insert the car key and turn it on to see which fuse is illuminated. This is the fuse you should use. Alternatively, if your kit needs constant power, turn off the car, remove the key, and observe which fuse slots remain lit to determine the correct one.

The Jansite Hardwire Kit includes a Mini-type fuse. Plug the red wire fuse connector into the switched fuse box, ensuring it is oriented correctly. Next, connect the yellow wire fuse connector to the "hot" fuse box, again checking the orientation.

To ground the hardwiring kit, locate a metal bolt or screw in your vehicle and slip the black wire (shaped like a C) underneath. Ensure it is not attached to any plastic parts. You may need a socket wrench to loosen the nut or bolt to insert the grounding terminal, then tighten it back up.

The Jansite Hardwire Kit has the following specifications: Input: 12-24V; Output: 5V 2.5A; ACC: 5V; Low voltage protection parameters: 11.3V±0.2V 23.3V±0.2V; Wire colors: Yellow - BAT+, Red - ACC, Black - GND; Length: 9.8ft; Mini USB Port.

The Jansite Type-C/USB-C Hardwire Kit (ASIN: B0CGZKCGVC) supports a 24-hour parking monitoring time-lapse function. By recording at 1 second per frame, it can create short videos from lengthy recordings, capturing all your important moments even when the engine is off.

The hardwire kit's low-voltage protection feature ensures uninterrupted power supply to the dash cam for up to 24 hours. If the vehicle's battery voltage drops to 11.6V or 23.5V, the regulator will automatically cut off the power to preserve enough charge for engine startup.

With ACC detection, the dash cam will automatically switch to parking mode when the vehicle's engine is turned off, and return to normal recording when the engine is started.

Designed with high safety standards, the mini USB hardwire kit features a built-in precision switching power supply module that can convert 12V (24V) to 5V, along with protective measures against excessive current and overheating. This kit is compatible with most car models operating between 12-24V.

product information: